日本最新免费二区_在线看黄A∨免费观看_老司机永久深夜在线视频_免费^a级黄色片

Keywords: dyeing machine,dyeing equipment

Your current position:Home » News » Huaxia-Information

Analysis of fabric clogging in high temperature high pressure dyeing machine

Author:Huaxia TechnologyHits:Published time:2019-04-07
In the process of using high temperature and high pressure dyeing machine, there will be many reasons leading to fabric clogging and dyeing can not be carried out.

After summarizing, there are the following points:

1. The nozzle is not adjusted, or the size of the nozzle does not match the thickness of the fabric. If the nozzle is not adjusted, it will only appear on the threaded nozzle.

2. The nozzle pressure is too large or too small, and the guide wheel is too fast or too slow.

If the nozzle pressure is too high, the speed of the guide wheel will be faster, and the cloth will be stacked in the dyeing machine, which may cause knotting.

3.High temperature main cylinder without pressure.

Generally, it is forgotten that the exhaust pipe pressure or exhaust valve, or one of the two is broken, there is no pressure in the main cylinder at high temperature, which will cause the nozzle pressure to be low and the guide wheel speed to be too fast.

4, the machine water level is too high or too much foam.

5. The diversion valve is not well regulated. In general, the diversion valve has been adjusted well, do not change it at will.

6. Too much fabric. The dyeing machine has its own capacity, so it is necessary to select the appropriate amount of fabric.

HJ.jpg

Contact Us
National hotline:86-13801428918

Contact:Xia Shaigen

Phone:86-13801428918

Tel:0086-523-84691028

Fax:0086-523-84691638

Add:No.88, Gongnong East Road, Jingjiang City, Jiangsu Province, China