日本最新免费二区_在线看黄A∨免费观看_老司机永久深夜在线视频_免费^a级黄色片

Keywords: dyeing machine,dyeing equipment

Your current position:Home » News » Huaxia-Information

Why do textiles have holes after dyeing

Author:Huaxia TechnologyHits:Published time:2021-01-16
Automatic printing and dyeing equipment for printing and dyeing production is undoubtedly a tiger. However, in the actual production process, there will occasionally be some defects. Today, Huaxia Technology Co.,Ltd will talk with you about the reasons for the holes after dyeing!

1. Defect form

After dyeing and finishing, one or two yarns are broken in semi-finished products or finished products, and large and small holes appear in serious cases. The defects are regular and sometimes irregular, which are usually sudden defects. If there is negligence, a large number of defective fabrics will be produced, which will seriously affect the quality and use value of semi-finished products and finished products. Once the defect is caused, it cannot be remedied.

2. Causes

The reasons for the formation of holes in the process of dyeing and finishing can be summarized as burn, hook, scratch, pull, roll and fiber brittleness.

(1) Burn out: mainly occurs in the singeing machine, caused by improper singeing process.

(2)Hook break: in the process of dyeing and finishing, crochet may occur in all parts of cloth. When the fabric is running, it will be broken due to the contact of protruding hard fabric and broken parts. The puncture of needle holes on the edge of heat setting cloth is mainly caused by the bending needle on the needle plate, which must be checked and replaced in time.

(3) Abrasion: the fabric may be abraded by friction when it passes through the rough parts of the equipment.

(4) Tear: one of the cases is that there are small holes in the fabric itself which are not found in time, and the original small holes will expand after silking or dyeing. Attention should be paid to find out the causes of the holes in the pre-processing process. Another situation is that the fabric is easy to be broken if the pretreatment elongation of the thin fabric is too large, the door width is too narrow, and the door width is too large when it is pulled to the specified width; in addition, the fabric is easy to be broken if the opening of the tenter is too late, and the angle of the clip blade is too sharp.

(5) Crushing: the fabric passes through a roller embedded with hard material and is rolled into a hole by the roller. There are dry and hard lumps on the roller of calender, resulting in calender holes.

(6) The fiber is fragile; the fabric breaks when it is pulled. The reason is improper chemical treatment (such as bleaching embrittlement) in dyeing and finishing process.
223.JPG


If you are interested in our fabric/yarn dyeing machine,you can contact me.

Email:huaxia@jjhuatai.com

Whatsapp/Wechat:86-15952628265

Contact Us
National hotline:86-13801428918

Contact:Xia Shaigen

Phone:86-13801428918

Tel:0086-523-84691028

Fax:0086-523-84691638

Add:No.88, Gongnong East Road, Jingjiang City, Jiangsu Province, China